9V Battery Connection Cable 
Concave And Convex Glass Lens Set 5cm Diameter 4 Piece Shaved Edges 
Description
- Import of ECE
- It is easy to use. The device is turned on with the power button and immersed in the container containing the liquid to be measured. Reading will be completed in a short time and the result will be seen on the LCD screen. There is no need for materials such as test strips etc.
- The product has ATC function. In this way, your device will give much more accurate results than devices without ATC function, and will be able to accurately measure the pH value of samples at any temperature between 0°C-50°C without having to worry about temperature.
- Values can be read clearly and easily thanks to the backlit and large LCD screen.
- Thanks to the sensitive electrode sensor inside the device, the pH range of 0-14 can be measured.
- With its easily portable design, it can be easily taken and used anywhere.
Its usage area is wide; Suitable for use in liquids such as drinking water, pools, aquariums, RO systems, spas, hydroponics, garden ponds, urine, soap mixtures, wine, beer, food pH balance, etc., at home and in laboratories - 3 types of calibration powder (4pH@25°C, 6.86pH@25°C, 9.18pH@25°C) and 2 types of calibration liquid (4.003pH@25°C, 6.864pH@25°C) are shipped together with the product.
- 4 AG13 button batteries are supplied with the product.
- Shipped in yellow, red and blue colors depending on stock availability.
- Resolution: 0.01pH
- Measurement range: 0.00-14.00 pH
- Accuracy: ±0.1PH
- Working environment: 0~50°C
- ATC (Automatic temperature compensation): 0°C~50°C
- Calibration: 3-way
- Power: 1.5V AG13 battery (4 pcs)
- Size: 170mm×36mm×23mm
- Weight: 85g
Application:
- Remove the protective cover
- Rinse the electrode with pure water and dry it with filter paper.
- Turn the device on and off by turning the on/off button.
- Immerse the device into the liquid to be measured, taking care not to exceed the immersion level marked on the device. Never exceed the immersion level
- Mix gently and wait until the result appears steady on the LCD display.
- After the process is completed, clean the electrode with pure water and turn the device off with the on/off button.
- Be sure to close the protective cover after use.
Attention:
- Please calibrate the device before use when it is not used for a long time.
- Please calibrate the device when the battery compartment is opened for reasons such as battery replacement etc.
- If the electrode has been in contact with air for a long time, please calibrate the device.
- Please do not touch the electrode and bulb with hard objects, fingers, etc. When cleaning, rinse gently with water and gently absorb the water with filter paper.
- Always keep the protective cover closed when the device is not in use. If the electrode is in contact with air for a long time, it may dry out and the device may not work properly.
- If the electrode dries out, soak the device in pure water for a few hours.
- If the LCD display is difficult to read or does not show, replace the batteries, paying attention to polarity.
- If there is a problem in calibration, “Err” will flash on the LCD display. Calibrate the device
Reviews
There are no reviews yet.